Alesis MultiMix 4 USB Four-Channel Ultra Portable USB Mixer

$254.62

Description

  • Four-channel mixer with digital output
  • Low-noise digital 16-bit, 44.1 kHz signal on USB for easy computer interface
  • Two channels of XLR inputs with gains and switchable 48V phantom power
  • High-impedance guitar input
  • Main and headphone outputs with independent level controls

Perfect for using in basic computer-recording setups, video editing and production studios, and portable podcasting setups, the Alesis MultiMix 4 USB outputs not only line-level analog audio but also stereo 16-bit, 44.1 kHz digital audio over USB for low-noise, easy computer connection. You can also monitor back from your computer through the same USB connection.

Alesis MultiMix 4 USB portable mixer

The MultiMix 4 USB mixer has four input channels, all of which can accept a 1/4-inch line input. You can plug XLR microphones into channels one and two, including condensers thanks to the mixer’s switchable 48V-phantom power supply. You can also plug a guitar or bass directly into channel one’s switchable high-impedance input.

Channels one and two offer switchable high-pass filtering at 75Hz to eliminate low-frequency rumble, handling and wind noise. Each channel has an independent pan control and channels one and two provide high and low-shelving EQs. Channels one and two have independent gain trims, while channels three and four are configured as a stereo pair at the level and pan controls.

Key Features

  • Four-channel mixer with USB stereo input and output
  • Low-noise digital 16-bit, 44.1 kHz signal on USB for easy computer interface
  • Four 1/4-inch line-level inputs plus RCA tape in/out
  • Two XLR mic inputs with gains, high-pass filters, and switchable 48V phantom power
  • High-impedance guitar input
  • Dual-band EQ on mic inputs
  • Multicolor LED metering
  • Main and headphone outputs with independent level controls

Specifications

  • Inputs:
    • Line (CH 1, 2): 10 KΩ input impedance 5.5 mV ~ 4.9 V RMS sensitivity for max output
    • Mic (CH 1, 2): 600 Ω input impedance balanced 700 mV RMS sensitivity for max output
    • Line (CH 3, 4): 700 mV RMS sensitivity for max output
    • HPF (CH 1, 2): 200 Hz (-1 dB), 80 Hz (-3 dB), 20 Hz (-24 dB)

    Outputs:

    • Line: 7 V RMS max
    • Headphone: 0.5 W into 47 Ω

    Signal-To-Noise Ratio:

    • Line: > 92 dB
      (max output; JIS A-weighted) Mic: > 62 dB
  • Distortion: < 0.02%
  • Frequency Response:
    • Line: 20 Hz – 20 kHz (± 0.5 dB)
    • Mic: 20 Hz – 15 kHz (± 0.5 dB)
  • Channel Equalizer:
    • Bass: ± 14 dB @ 80 Hz
    • Treble: ± 14 dB @ 12 kHz
  • Channel Fader Kill: > 90 dB @ 1 kHz
  • Crosstalk: > 85 dB @ 1 kHz
  • Interface: USB1.1 or higher (stereo in and stereo out)
  • Power Adapter: 10 V AC, 500 mA
  • Weight: 1.5 pounds
  • Dimensions: 7.75 x 6 x 2 inches (LxWxH)